The Canon Pixma G4210 printer error code B200 can be caused by many issues. Still, the Canon Pixma G4210 error code B200 typically happens when the print head is faulty or misaligned. To fix the Canon Pixma G4210 error code B200, you’ll need to replace the print head and then align it, so it prints clearly again. Suppose you don’t want to deal with taking apart your printer and putting it back together again. In that case, it’s best to take it to a local shop or send it to Canon under warranty. If you’re still having problems with your Canon Pixma G4210 showing the error code B200, the printer needs to be serviced or cleaned.
top of page
bottom of page
Basic Troubleshooting Of Canon B200 Printer Error
Some Quick-Fixes For Canon Printer B200 error
Here’s a list of basic troubleshooting techniques to deal with the B200 error Canon Printer:
Replace the defective cartridges to start with the troubleshooting of Canon Printer error codes B200.
Remove and clean the printhead with a piece of cloth.
Reseat your printhead.
Check for any foreign particles or debris inside the printer.
Switch off the printer, lift up the printer lid, and replace the tank holder if required.
Press the Power and Copy buttons on the printer.
Check if the Canon B200 Printer error is resolved.
Additional Methods To Fix Canon Pixma Printer Error B200
List of Some More Methods to Fix B200 Error Canon Printer
Replace the defective ink cartridge with a new one.
Remove the printhead and clean it thoroughly.
Ensure that the ribbon cable connector is properly connected to the print head while reinstalling the print head.
Clean the print head thoroughly by flushing all ink out.
Try reloading the printer driver as Canon Printer error codes B200 can also occur due to a corrupted driver.
Turn off the printer for at least two hours by unplugging the power adapter from the electrical socket.
Install a new print head and check if the B200 Canon Printer error is resolved.
Regards,
Rachel Gomez